Welcome Cogobuy!

科通芯城 ,中国最大的IC及其他电子元器件交易型电商平台100%正品保证!

LTC1053

所属分类:
功率放大器
目标应用:
热电偶放大器
电子秤
医疗器械
应变计放大器
高分辨率数据采集
直流精确RC有源滤波器
更多...

产品参数

描述

The LTC™1051/LTC1053 are high performance, low cost dual/quad zero-drift operational amplifiers. The unique achievement of the LTC1051/LTC1053 is that they integrate on chip the sample-and-hold capacitors usually required externally by other chopper amplifiers. Further, the LTC1051/LTC1053 offer better combined overall DC and AC performance than is available from other chopper stabilized amplifiers with or without internal sample/hold capacitors.
The LTC1051/LTC1053 have an offset voltage of 0.5µV, drift of 0.01µV/°C, DC to 10Hz, input noise voltage typically 1.5µVP-P and typical voltage gain of 140dB. The slew rate of 4V/µs and gain bandwidth product of 2.5MHz are achieved with only 1mA of supply current per op amp.
Overload recover times from positive and negative saturation conditions are 1.5ms and 3ms respectively, about a 100 or more times improvement over chopper amplifiers using external capacitors.
The LTC1051 is available in an 8-lead standard plastic dual-in-line package as well as a 16-pin SW package. The LTC1053 is available in a standard 14-pin plastic package and an 18-pin SO. The LTC1051/LTC1053 are plug in replacements for most standard dual/quad op amps with improved performance.

特性

  • Dual/Quad Low Cost Precision Op Amp
    No External Components Required
    Maximum offset Voltage 5µV
    Maximum Offset Voltage Drift 0.05µV/°C
    Low Noise 1.5µVp-p (0.1Hz to 10Hz)
    Minimum Voltage Gain, 120dB
    Minimum PSRR, 120dB
    Minimum CMRR, 114dB
    Low Supply Current 1mA/Op Amp
    Single Supply Operation 4.75V to 16V
    Input Common Mode Range Includes Ground
    Output Swings to Ground
    Typical Overload Recovery Time 3ms
    Pin Compatible with Industry Standard Dual and Quad Op Amps
top 科通云助手